A great looking concrete polished floor can speak volumes about the quality and environment of your company. Polished concrete floors have many advantages as it is durable, safe, and cost effective. If you have been thinking about polishing your industrial floor, then you have found the right place. Polishing concrete takes a number of variables for success. It takes experience, technique, and the right equipment. If you have the first two items listed checked, then it’s time to select the right equipment for the job. It is imperative that you choose the best polished concrete equipment available in order get the job done right!

There are three main variables in selecting which grinder to us for polishing concrete; the weight of the machine, RPM variability and number of heads on the machine. The weight of the machine is important in order to have enough down pressure to cut the concrete during the initial grinding. The RPM variability is important so you can adjust the speed of the cutting or polishing. Most machines will have 3 or 4 heads, depending on the concrete an whether you are in a cutting phase or polishing stage will determine whether or not you will use a 3 headed or 4 headed grinder.

An experienced industrial flooring expert will have knowledge of the different types of polished concrete equipment needed for every situation. A reputable concrete polishing contractor will own multiple grinders with varying weight and heads in order to bring out the best in your concrete. If your project seems too much to handle, contact Liquid Floor Systems today. Let Liquid Floor Systems assist you in creating a great looking industrial floor. We want to help you protect your investment and increase the value of your facility.

Read more of our blogs and become an industrial flooring expert

Liquid Floor Systems recently completed a polished concrete project in Eastern North Carolina. It was a LEED project, which meant we had to comply with specific requirements in order to help the GC obtain the LEED certification on the building. LEED certification provides independent, third-party verification that a building project meets the highest green building and performance measurements (usgbc.org).

Another focus of the project was on the analysis of the concrete. We had to determine the best polish steps to give the customer the best looking floor. The polish was initially going to be an 800 grit in order to save money on the project.  Through our process this floor ended up looking like a 3000 grit polish, greatly exceeding the customer’s expectations.

Overall, it was a great LEED concrete project and everything turned out perfect.  At Liquid Floor Systems, we take pride in everything we do and every inch counts. We want to exceed your expectations.

With the advancement of science and technology, there are innovations taking place in all industries, and that includes flooring. Yes, flooring has come a long way from plain old linoleum, granite, marble, mosaic, and tiles. With the development of an industrial epoxy floor coating, you now have the option of fully customizing your floor with graphics, patterns, and vibrant colors.  Epoxy floors not only improve the quality of your floor, but it also enhances the look of the floor as well. Let us show you how an industrial epoxy floor coating can enhance the look of your work area.

Full Customization and Design:

Industrial epoxy floor coatings are a good choice for your floor, because you can design the look and feel to your liking. Epoxy floors allow you to fully customize your floor with vibrant colors, distinctive designs, and much more. It allows you to highlight line striping and aisle markings, which give the entire area a very professional and organized look. Industrial floor coatings will create a bright and vibrant work area for your employees, and leave them with a more productive and happy work environment.

Protective and Long Lasting:

Industrial epoxy floor coatings are ideal for industrial and commercial areas, where the floor is subject to heavy duty work. A great feature of epoxy coating is that it is impervious to stains of all kinds. It is extremely easy to clean and maintains its shiny look, and will continue to reinforce the look of the floor for a long time. Moreover, it will not crack up with the variations in temperature brought on by the changing seasons. An Industrial epoxy floor coating has protective and long lasting attributes that will help continue to keep your floor looking great for a long time.

An Industrial epoxy floor coating is a revolutionary solution for your industrial floor that provides an atmosphere unlike anything else. Let Liquid Floor Systems assist you in creating a great looking industrial epoxy floor coating. We want to help you protect your investment and increase the value of your facility.

For more industrial epoxy floor coating help go to: http://www.liquidfloors.com/

A newly re-done concrete polished floor can do wonders for your company. A concrete polished floor is cost effective solution that is also great looking. However, re-polishing your industrial concrete floor can be quite a tedious task. You will need the right know-how and equipment in order to get the job done right. Below are five essential tools for creating the perfect concrete polished floor.

The most essential equipment required for a perfect concrete polished floor are:

1.    Grinders and polishers: It is not only important to have the best grinders, but the correct weight and RPM of the grinder is also necessary for a good polishing job. Grinders come in various sizes and go up to 36 inches. The size of the grinder will depend on the area of the surface that a polisher will cover in one day. A diamond grinder equivalent to HTC 800 is ideal for cutting and polishing floors. A grinder with a higher RPM is needed for polishing the concrete in the steps. Having the correct cutters is equally necessary. The right cutters for the diamond grinder are just as important as the grinder.

2.    Diamond tools for grinding and polishing: This is the second most essential equipment needed for a concrete polished floor. There are two kinds of pads tools used. The metal bond tools are used for grinding and polishing hard preparing concrete floors, while the resin tools are used for polishing the surface.

3.    Industrial Floor Vacuum: Most polishers have evolved, and now are a dry grinding and polishing system and this gives rise to a lot of dust. Since this dust can be hazardous to your health, you must have a quality industrial floor vacuum to clean up all the dust and fragments left over.

4.    Hardening and compacting agents: All concrete polishing surfaces use agents to harden the concrete, and make it denser. The main job of the hardener agent is to make the concrete hard, so that it can be easily polished. The compacting agents make the concrete floor dense or thick, so that it becomes water-resistant, stain-free, and shiny for a longer period of time.

5.    Enhancing the floor with coloring agents, dyes and stains: Gone are the days when a plain light floor was all that you could get. Now with the help of dyes and stains you can get the floor color of your choice. If the final concrete mixture is yet to be poured, the look of the floor can be enhanced by mixing glass beads, integral color, metal pieces, colored aggregate etc.

If this process sounds too difficult for you to do alone, let Liquid Floor Systems assist you in creating a great looking concrete polished floor. We want to help you protect your investment and increase the value of your facility.

Does your old industrial concrete floor have stains? Is it cracked or worn out? If yes, then you need to give your old industrial concrete floor a facelift. Re-coating an old industrial concrete floor can make your industrial center like new. However, it is easier said than done, re-coating your industrial floor can be a very un-daunting task. It is going take knowledge, preparation, and time. Below are 5 steps to give your old industrial concrete floor a facelift.

1. Checking the floor: First and foremost you need to check the floor to see if the substrate is firm and that the floor is tightly attached to it. You must also check that the floor is not peeling, or cracking, or leaving the substrate. A re-coat will only be as good as the last one if the coating is not tightly bound to the substrate.

2. Isolating spots: If there are spots on the floor, or the floor is lifting, then you must deal with them first. In this case, you must remove the top coat before you begin anything else.

3. Sanding or buffing the floor: For this you will need a sander or a grinding machine with an aggressive sanding head. Since only the top gloss or shine has to be removed, a buffing – machine with a medium grit sanding head is needed. Once you have removed the old coating only then can you begin the re – coating process.

4. Cleaning the floor: If you have ascertained that the floor is firmly attached to the ground below. Now, check for the kind of finish or seal that has been applied on your old floor. Cures and seals, epoxies, polyurethane and oil and water based seals can be removed by using a floor cleaner.

5. Choosing a coat of your choice: Once the cleaning has been done thoroughly, then you can go ahead and choose the coating of your choice. If you are using an epoxy based coating, then you need to apply a primer for uncoated concrete. In case the floor is previously coated then after thorough cleaning you can apply a top coat with a urethane topcoat. The primer, though easy to apply, it might take 16 hours to dry up. A urethane top coat is excellent for epoxy floor coatings as it improves the look of the floor and shields it against wear and tear.

Depending on which coating you choose you will have to allow your industrial concrete floor to dry off in about 24 hours, before you can start using it. If this process sounds too difficult for you to do alone, let Liquid Floor Systems assist you in creating a great looking industrial concrete floor. We want to help you protect your investment and increase the value of your facility.

For more industrial concrete floor help go to: http://www.liquidfloors.com/

So you’ve made the first step, you are fed up with your old, worn out, and cracked industrial concrete flooring. You have decided in order for your business to thrive, your industrial floor needs a facelift. The hard part is going to be choosing the right industrial concrete flooring company to get the job done right. This will be an important decision for your company, because in the land of flooring companies, not all are created equal!

Liquid Floor Systems is the best solution for your flooring needs. We offer multipurpose flooring solutions that will improve everything from the value to the cost of your flooring. We are accomplished professionals – committed to helping our customers meet their goals – on target and on budget. Our experience sets us apart from others in the industry, making us the natural choice when it comes to your next industrial concrete flooring project.

Why Choose Liquid Floor Systems?

* 40 years total experience
* Professionally trained applicators
* Free consultation providing customized surface solutions
* Comprehensive warranty
* The most flexible installation schedule in the industry including weekends and holidays
* Surface testing using the latest methods
* Detail oriented workmanship
* Support of product manufacturers
* Latest surface preparation methods

Liquid Floor Systems is here to help you with your industrial concrete flooring needs. Your project is our project. Your success is our success. We don’t just want to meet your expectations, we want to exceed them. This is always our goal.

Epoxy Floor coating- Armor Top High Shine Blue

Industrial epoxy floor coatings add value to your work space by making them brighter, more attractive, and more efficient. The benefits of urethane and epoxy flooring are many – from the maximized cost efficiency to the long term protection and improved look. Below is a step by step process in applying an epoxy coating onto your industrial floor.

Step 1: Diamond Grind area to remove contaminants and prepare concrete for coatings.

Step 2: Vacuum thoroughly to remove dirt and dust from the area.

Step 3: Apply 100% solids epoxy prime coat (pigmented) to area, and distribute it with a squeegee.

Step 4: Allow epoxy prime coat to tack over.

Step 5: Apply 100% solids epoxy build coat (pigmented) to area, and smooth the epoxy using a long-handled paint roller.

Step 6: Allow epoxy build coat to tack over.

Step 7: Sand epoxy with 100 grit screens to prepare for topcoat.

Step 8: Rinse area and remove any excess material from your industrial floor

Step 9: Apply aliphatic high gloss urethane (pigmented) to area.

Step 10: Wait for industrial epoxy floor to fully cure, and begin business operations.

If this process sounds too difficult for you to do alone, let Liquid Floor Systems assist you in creating a great looking industrial epoxy floor. We want to help you protect your investment and increase the value of your facility.

One major goal for every company is to create a work environment that ensures overall safety and productivity for all employees. A great solution is to apply a safe coat of industrial epoxy floor coating on to your floor. It is a cost effective solution that provides long term protection and an improved look for your industrial floor. Safe industrial flooring can be the best asset for your company, not only for the safety of your employees, but also for the durability and lasting quality it provides. Below are five ways industrial epoxy floor coating can create a safe and secure work environment.

1.    Brightens your work area- Increases light reflectivity up to 300% which saves on utility expenses and maximizes work efficiencies.

2.    Keeps work environment cleaner industrial epoxy floor coating can produce a cleaner work environment by reducing floor maintenance and cleaning costs.

3.    Provides painted markings- Increases workflow by directional markings for more organization and productivity to work areas.

4.    Non-skid can be added to coatings- industrial epoxy floor coating can decrease injuries with non-slip surfaces.

5.    Guards against chemical corrosion- Protects against dangerous chemical deterioration that can severely damage your floor.

Liquid Floor Systems is company that provides safe and secure industrial flooring for companies and individuals. Let Liquid Floor Systems assist you in flooring options that will deliver you with powerful and long lasting results. We want to help you protect your investment and create a secure and safe environment for your facility.